| AMD Athlon X2 7750 - Cinebench, Valve benchmarks, Power Consumption, Overclocking |
|
|
|
| Written by Jeff_Tom | |||||
| Sunday, 14 December 2008 21:13 | |||||
Page 2 of 3
Cinebench saves 14 seconds with the Kuma processor.
Valve Map compilation benchmark shaves off a good 56 seconds from the rendering time thanks more than likely to again the large L3 cache and faster HyperTransport bus.
Valve's particle benchmark isn't quite as large a giving 4 more points.
With more performance comes more power taking another 20W to run at idle and 25W at load under Valve Map creation benchmark under load. Cool 'n Quiet was disabled with testing.
We were able to get into Windows at 3.3GHz with a large increase of voltage bumping things up to 1.5v but it was not stable at this overclock. 3.1 or 3.2GHz is probably more reasonable overclock as with most dual cores from AMD.
|
|||||
| Last Updated on Sunday, 14 December 2008 21:16 |