htt of 1300mhz.
Yes the pci/agp is locked.
The dimms run flawlessly in single channel mode at ddr550, but when in dual channel, they give many errors in windows.
ok, did you guys not read my previous posts?? i've tried tons of timings. Yes the pci/agp is locked. If i was really having the issues you guys are mentioning, how was I able to run the DIMMS stable at ddr550 in single channel?? My AV8 has a max fsb of 315mhz, and a max htt of 1300mhz. Actually, the htt might even be able to do better, I stopped trying at 1300, because I assumed it would give enough headroom. The dimms run flawlessly in single channel mode at ddr550, but when in dual channel, they give many errors in windows.
I read your previous posts, but you didn't provide any useful information about what timings you had tried. Now that you have, it's obvious that you have a major problem. Your HTT should never be running that fast. It's no wonder your board is unstable with a 30% overclock on your HTT. If you want to run at PC-4000 speeds, you need to set the HT multiplier down to 4. Much over that, and you'll need it at 3.
Also, lose the attitude. It doesn't make people want to help you.
running at that spped does not help you in any way if you ran it at 800mhz you would not know the difference
with the system overclocked , did you go in the bios and check the mhz of your agp/pci-e/pci ?
have you run memtest86 at the speed that you are trying to run it in dual channel ?
if I install them in single channel, they will work at ddr550 stable(tested both sticks individually).
did you try both sticks together in a single channel mode ?
did you check with cpu-z that when you thought that you had the memory running in dual channel it was actually runing in dual channel ??
check it in cpu-z , and what dimms are your memory in ?
Users browsing this forum: No registered users and 1 guest